100 +40 TON H TYPE HYDRAULIC DEEP DRAW PRESS WITH DIE CUSHION
Complete with hydraulic power pack & amp;control electrical panel, which will have following major technical details and specifications:-
1. TYPE H TYPE – DOWN STROKE
2. MAIN RAM CAPACITY 100TON
3. RETURN CAPACITY 20TON
4. STROKE 400 MM
5. DAYLIGHT GAP 700 MM
6. SHUT HEIGHT 400 MM
7. NO. OF MAIN CYLINDER 1 NO. Double ACTING
8. MAIN RAM DIA 150 MM
9. BED SIZE 600 x 600 MM
10. MOVING BOLSTER SIZE 600 x 600MM
11. MAIN CYLINDER SPEED
A) APPROACHINGSPEED 70 MM / SEC
B) PRESSING SPEED 8-15 MM/ SEC
C) RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 1/2inch’s
15. DIE CUSHION CAPACITY 40TONS
16. DIE CUSHION STROKE 50-300 MM
17. DIE CUSHION TABLE SIZE 400 X 400 MM (SINGLE PAD)
18, CUSHION PIN HOLES 35 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION OF“AUTO”& amp; “INCH” CYCLE
PUMPING UNIT:
01. MOTOR 10 HP
02. PUMP 1 No. High & amp; Low Pressure
03. SOL.RETURN VALUE 3 NO’S.
04, NON_RETURN VALUE : 2 NO’S
05. RELIEF VALUE : 3 NO’S
06. SOL UNLOADED VALUE 1 NO’S
07. PRESSURE GAUGE 2 NO’S
08. PREFIL VALUE 1 NO’s
09. PRESSURE SWITCH 1 NO’S
10. OIL RESERVOIR 1 NO’S .300 Liters
PRICE:
PRICE FOR THE ABOVE DESCRIBED 100+40 TON H TYPE HYDRAULIC DIE CUSHION DEEP DRAW PRESS WITH PLC CONTROL is RS. 6, 33, 000/-(Rupees Six lakhs thirty three thousand Only)
DELIVERY:
5 To 6 Weeks from the date of Confirm Order.
Complete with hydraulic power pack & amp;control electrical panel, which will have following major technical details and specifications:-
1. TYPE H TYPE – DOWN STROKE
2. MAIN RAM CAPACITY 100TON
3. RETURN CAPACITY 20TON
4. STROKE 400 MM
5. DAYLIGHT GAP 700 MM
6. SHUT HEIGHT 400 MM
7. NO. OF MAIN CYLINDER 1 NO. Double ACTING
8. MAIN RAM DIA 150 MM
9. BED SIZE 600 x 600 MM
10. MOVING BOLSTER SIZE 600 x 600MM
11. MAIN CYLINDER SPEED
A) APPROACHINGSPEED 70 MM / SEC
B) PRESSING SPEED 8-15 MM/ SEC
C) RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 1/2inch’s
15. DIE CUSHION CAPACITY 40TONS
16. DIE CUSHION STROKE 50-300 MM
17. DIE CUSHION TABLE SIZE 400 X 400 MM (SINGLE PAD)
18, CUSHION PIN HOLES 35 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION OF“AUTO”& amp; “INCH” CYCLE
PUMPING UNIT:
01. MOTOR 10 HP
02. PUMP 1 No. High & amp; Low Pressure
03. SOL.RETURN VALUE 3 NO’S.
04, NON_RETURN VALUE : 2 NO’S
05. RELIEF VALUE : 3 NO’S
06. SOL UNLOADED VALUE 1 NO’S
07. PRESSURE GAUGE 2 NO’S
08. PREFIL VALUE 1 NO’s
09. PRESSURE SWITCH 1 NO’S
10. OIL RESERVOIR 1 NO’S .300 Liters
PRICE:
PRICE FOR THE ABOVE DESCRIBED 100+40 TON H TYPE HYDRAULIC DIE CUSHION DEEP DRAW PRESS WITH PLC CONTROL is RS. 6, 33, 000/-(Rupees Six lakhs thirty three thousand Only)
DELIVERY:
5 To 6 Weeks from the date of Confirm Order.
Keywords
