Make 30 Ton Compressing Molding Press Machine whic...

Make 30 Ton Compressing Molding Press Machine which will have following technical details and specification:-
 Main Capacity :- 30 Ton
 Type of the machine :- four pillar Type up Stroke
 Return Capacity :- 5 Ton
 Stroke :- 450mm
 Opening Daylight Gap :- 500mm
 Shut Height :- 450mm
 No. of Main Cylinder : - 1No. Double Acting
 Main Ram Dia :- 140mm
 Bottom Bolster Size :- 300 X 300 mm
 Moving Bolster Size :- 300 X 300mm
 Cylinder Fast up Speed :- 60mm / Sec
 Slow Down Speed :- 20mm/Sec
 Pressing Speed :- 20mm /Sec
 Return Speed :- 100 To 120mm /Sec
 Working Height From :- 700mm
Floor Level
 Maximum Working Pressure :- 250KG/Cm2
 T-Slot Size :- ½ Inches
 Bottom Transfer Capacity :- 10 Tons
 Bottom Transfer Stroke :- 400mm
 Heating :- up to 300c
 Cycle Control :- Through Panel Board
 Mode Of Operation :- Push Button Having the Provision
Of “Auto” & amp; “Inch” Cycle


PUMPING UNIT:-
 Motor :- 5 Hp Three Phase 1440 RPM
 Pump : - 1No. High & amp; Low Pressure (yuken)
 Sol. Return Value : - 1Nos.(polyhedron)
 Non. Return Value : - 1Nos.(polyhedron)
 Relief Value : - 2Nos.(polyhedron)
 Sol. Unloaded Value : - 2Nos.(polyhedron)
 Pressure Gauge :- 2Nos.hi-teak
 Relief Value :- 1nos. (polyhedron)
 Pressure Switch : - 1nos.(polyhedron)
 Oil Reservoir :- 1Nos. 200 Letter (Oil Will Be Party Provided )
 Water cooling
PRICE:-
 Price for the above described 30 Ton Compressing Moulding Press Machine is INR. 3, 75, 000/-(RUPEES THREE LAKHS SEVENTY FIVE THOUSAND ONLY
DELIVERY:-
 5 to 6 weeks from the date of your confirmed order along with advance.