make200 +50 TON H TYPE HYDRAULIC DEEP DRAW PRESS WITH DIE CUSHION, Complete with hydraulic power pack & amp;control electrical panel, which will have following major technical details and specifications:-
1.TYPE H TYPE – DOWN STROKE
2. HYDRAULIC CYLINDER 200TON(ID 300 mm NOD376 mm)
3. RETURN CAPACITY 40TON
4. STROKE 1500 MM
5. DAYLIGHT GAP 1500 MM
6. SHUT HEIGHT 800 MM
7. NO. OF MAIN CYLINDER 1 NO. Double
ACTING
8. MAIN RAM DIA 225 MM
9. BED SIZE 1250 x 1250 MM
10. MOVING BOLSTER SIZE 1250 x 1250MM
11. MAIN CYLINDER SPEED
A) APPROACHINGSPEED 70 MM / SEC
B) PRESSING SPEED 8-15 MM/ SEC
C) RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 3/4inch’s
15. DIE CUSHION CAPACITY 80TONS
16. DIE CUSHION STROKE 50-400 MM
17. DIE CUSHION TABLE SIZE 600 X 600 MM (SINGLE PAD)
18, CUSHION PIN HOLES 40 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL (ALL CONTACTOR AND SWITCH
CEMENS MAKE)
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION
OF“AUTO”& amp; “INCH” CYCLE
PUMPING UNIT:
01. MOTOR 25HP(SEMANCE MAKE)
02. PUMP1 No.High & amp; Low Pressure (YOUKEN AND POLYHYDROEN)
03. SOL.RETURN VALUE 3 NO’S.(YOUKEN MAKE)
04, NON_RETURN VALUE : 2 NO’S
05. RELIEF VALUE 3 NO’S
06. SOL UNLOADED VALUE 1 NO’S
07. PRESSURE GAUGE 2 NO’S
08. PREFIL VALUE 1 NO’s
09. PRESSURE SWITCH 1 NO’S
10. OIL RESERVOIR 1 NO’S .600 Litre
Price for the above described 200+80 TON H TYPE HYDRAULIC DIE CUSHION DEEP DRAW PRESS WITH PLC CONTROL is RS.16, 50, 000/-(RUPEES SIXTEEN LAKHS FIFTY THOUSND ONLY)
DELIVERY:
8 to 10 weeks from the date of Confirm Order.
1.TYPE H TYPE – DOWN STROKE
2. HYDRAULIC CYLINDER 200TON(ID 300 mm NOD376 mm)
3. RETURN CAPACITY 40TON
4. STROKE 1500 MM
5. DAYLIGHT GAP 1500 MM
6. SHUT HEIGHT 800 MM
7. NO. OF MAIN CYLINDER 1 NO. Double
ACTING
8. MAIN RAM DIA 225 MM
9. BED SIZE 1250 x 1250 MM
10. MOVING BOLSTER SIZE 1250 x 1250MM
11. MAIN CYLINDER SPEED
A) APPROACHINGSPEED 70 MM / SEC
B) PRESSING SPEED 8-15 MM/ SEC
C) RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 3/4inch’s
15. DIE CUSHION CAPACITY 80TONS
16. DIE CUSHION STROKE 50-400 MM
17. DIE CUSHION TABLE SIZE 600 X 600 MM (SINGLE PAD)
18, CUSHION PIN HOLES 40 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL (ALL CONTACTOR AND SWITCH
CEMENS MAKE)
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION
OF“AUTO”& amp; “INCH” CYCLE
PUMPING UNIT:
01. MOTOR 25HP(SEMANCE MAKE)
02. PUMP1 No.High & amp; Low Pressure (YOUKEN AND POLYHYDROEN)
03. SOL.RETURN VALUE 3 NO’S.(YOUKEN MAKE)
04, NON_RETURN VALUE : 2 NO’S
05. RELIEF VALUE 3 NO’S
06. SOL UNLOADED VALUE 1 NO’S
07. PRESSURE GAUGE 2 NO’S
08. PREFIL VALUE 1 NO’s
09. PRESSURE SWITCH 1 NO’S
10. OIL RESERVOIR 1 NO’S .600 Litre
Price for the above described 200+80 TON H TYPE HYDRAULIC DIE CUSHION DEEP DRAW PRESS WITH PLC CONTROL is RS.16, 50, 000/-(RUPEES SIXTEEN LAKHS FIFTY THOUSND ONLY)
DELIVERY:
8 to 10 weeks from the date of Confirm Order.
Keywords
