make60 +25 TON H TYPE HYDRAULIC DEEP DRAW PRESS WITH DIE CUSHION,
Complete with hydraulic power pack & amp;control electrical panel, which will have following major technical details and specifications:-
1. TYPE H TYPE – DOWN STROKE
2. MAIN RAM CAPACITY 60TON
3. RETURN CAPACITY 10TON
4. STROKE 400 MM
5. DAYLIGHT GAP 600 MM
6. SHUT HEIGHT 200 MM
7. NO. OF MAIN CYLINDER 1 NO. Double ACTING
8. MAIN RAM DIA 110 MM
9. BED SIZE 600 x 600 MM
10. MOVING BOLSTER SIZE 600 x 600MM
11. MAIN CYLINDER SPEED
A) APPROACHINGSPEED 70 MM / SEC
B) PRESSING SPEED 8-15 MM/ SEC
C) RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 1/2inch’s
15. DIE CUSHION CAPACITY 25TONS
16. DIE CUSHION STROKE 50-200 MM
17. DIE CUSHION TABLE SIZE 300 X 300 MM (SINGLE PAD)
18, CUSHION PIN HOLES 25 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION OF“AUTO”& amp; “INCH” CYCLE
PUMPING UNIT:
01. MOTOR 7.5 HP
02. PUMP 1 No. High & amp; Low Pressure
03. SOL.RETURN VALUE 3 NO’S.
04, NON_RETURN VALUE : 2 NO’S
05. RELIEF VALUE : 3 NO’S
06. SOL UNLOADED VALUE 1 NO’S
07. PRESSURE GAUGE 2 NO’S
08. PREFIL VALUE 1 NO’s
09. PRESSURE SWITCH 1 NO’S
10. OIL RESERVOIR 1 NO’S .150 Liters
PRICE:
PRICE FOR THE ABOVE DESCRIBED 60+25 TON H TYPE HYDRAULIC DIE CUSHION DEEP DRAW PRESS WITH PLC CONTROL is RS. 3, 02, 500/-(RUPEES TWO LAKHS TWO THOUSAND FIVE HUNDRED ONLY)
ONE SET DIA RS. 45, 000/-
DELIVERY:
4 To 5 Weeks from the date of Confirm Order.
Complete with hydraulic power pack & amp;control electrical panel, which will have following major technical details and specifications:-
1. TYPE H TYPE – DOWN STROKE
2. MAIN RAM CAPACITY 60TON
3. RETURN CAPACITY 10TON
4. STROKE 400 MM
5. DAYLIGHT GAP 600 MM
6. SHUT HEIGHT 200 MM
7. NO. OF MAIN CYLINDER 1 NO. Double ACTING
8. MAIN RAM DIA 110 MM
9. BED SIZE 600 x 600 MM
10. MOVING BOLSTER SIZE 600 x 600MM
11. MAIN CYLINDER SPEED
A) APPROACHINGSPEED 70 MM / SEC
B) PRESSING SPEED 8-15 MM/ SEC
C) RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 1/2inch’s
15. DIE CUSHION CAPACITY 25TONS
16. DIE CUSHION STROKE 50-200 MM
17. DIE CUSHION TABLE SIZE 300 X 300 MM (SINGLE PAD)
18, CUSHION PIN HOLES 25 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION OF“AUTO”& amp; “INCH” CYCLE
PUMPING UNIT:
01. MOTOR 7.5 HP
02. PUMP 1 No. High & amp; Low Pressure
03. SOL.RETURN VALUE 3 NO’S.
04, NON_RETURN VALUE : 2 NO’S
05. RELIEF VALUE : 3 NO’S
06. SOL UNLOADED VALUE 1 NO’S
07. PRESSURE GAUGE 2 NO’S
08. PREFIL VALUE 1 NO’s
09. PRESSURE SWITCH 1 NO’S
10. OIL RESERVOIR 1 NO’S .150 Liters
PRICE:
PRICE FOR THE ABOVE DESCRIBED 60+25 TON H TYPE HYDRAULIC DIE CUSHION DEEP DRAW PRESS WITH PLC CONTROL is RS. 3, 02, 500/-(RUPEES TWO LAKHS TWO THOUSAND FIVE HUNDRED ONLY)
ONE SET DIA RS. 45, 000/-
DELIVERY:
4 To 5 Weeks from the date of Confirm Order.
Keywords
