150 TON FOUR H TYPE DEEP DREW 60 TON DIE CUSHION

150 +60 TON H TYPE HYDRAULIC DEEP DRAW PRESS WITH DIE CUSHION,

Complete with hydraulic power pack &control electrical panel, which will have following major technical details and specifications:-

1.TYPE H TYPE – DOWN STROKE

2.MAIN RAM CAPACITY 150TON

3.RETURN CAPACITY 40TON

4.STROKE 600 MM

5.DAYLIGHT GAP 900 MM

6.SHUT HEIGHT 800 MM

7.NO. OF MAIN CYLINDER 1 NO. Double ACTING

8.MAIN RAM DIA 180 MM

9.BED SIZE 800 x 800 MM

10.MOVING BOLSTER SIZE 800 x 800MM

11.MAIN CYLINDER SPEED

A)APPROACHINGSPEED 70 MM / SEC

B)PRESSING SPEED 8-15 MM/ SEC

C)RETURN SPEED 100 MM / SEC

12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM

13. MAXIMUM WORKING PRESSURE 250 KG / CM2

14. T- SLOT SIZE 3/4inch’s

15. DIE CUSHION CAPACITY 60TONS

16. DIE CUSHION STROKE 50-400 MM

17. DIE CUSHION TABLE SIZE 600 X 600 MM (SINGLE PAD)

18, CUSHION PIN HOLES 40 MM DIA EACH

19. CYCLE CONTROL THROUGH PANEL

20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION

PUMPING UNIT:

01. MOTOR 20 HP

02. PUMP 1 No. High & Low Pressure

03. SOL.RETURN VALUE 3 NO’S.

04, NON_RETURN VALUE 2 NO’S

05. RELIEF VALUE 3 NO’S

06. SOL UNLOADED VALUE 1 NO’S

07. PRESSURE GAUGE 2 NO’S

08. PREFIL VALUE 1 NO’s

09. PRESSURE SWITCH 1 NO’S

10. OIL RESERVOIR 1 NO’S .400 Liters